Filter disc

Horizontal Pressure Leaf Filters

Horizontal Pressure Leaf Filters are specially used when the filter cake is gummy and difficult to clean
automatically.

In this design filter leaves are easily accessible for manual cleaning. The connections are mounted on the fixed filter cover so that the same need not be opened when the Horizontal shell is retracted.

The filter leaves set is mounted on the fixed cover depending on the required application the cover closing device can be offered. The filtration surface area can be offered from 5m² to 70m² for both dry and wet cake removal. The cover closing design can be offered with eyebolt and nut arrangement or with the special quick-acting wedge lock automatic device.

Material of construction : Stainless steel, Carbon steel with rubber, PP, PVDF lining, Monel, inconel, etc. sealing are available in BUNA-N, Viton, EPDM, Nitrile, Silicon etc.

Working :

The liquid slurry is pumped into the filter vessel, clear filtration starts as the sufficient cake is build over the leaf surfaces and filtered liquid comes out through the manifold.

The solid keeps getting accumulated on the filter leaves and thick cake is formed. Once the pressure reaches the required designed level, the the cake is dried with hot air / steam and relived from the leaves by by pneumatically operated vibrator or by any other competent design method as required then for special application.

Ubo Filter Co.,Ltd could supply stainless steel filter elements,filter element, filter disc, sintered  filter,filter strainer,polymeric filter,basket filter, wire mesh filter ,pleated filter

more Congeneric Products..